-
-
LED Start Tine & Flicker Test System
○ LED Lamp “Start time” “Rise up” “Flicker” test solution.
○ Voltage phase angle settable,SYNC Technology make it more accurate.
○ Meet requirement of ERP1192/2012 2009/125/EC IEC60696.
System configuration
PM2000 Multiphotometer,Integrating Sphere,Standard lamp,Optical fibre,19" cabinet,WL Serial power cource (DC),CHP500C AC power source.
PM2000 Multiphotometer
PM2000 Multiphotometer a fast sampling instrument adopts 12 bits,the highest sampling speed use A/Dtechnology, which reach to 10MHz, to realize light source fast test, it can record sample waveform with computer.Uniquedouble measurement pattern design, mode one.
PM2000 used as a normal illuminometer, which apply to test stable lightsource parameters, could achieve high measuring accuracy; Mode two, in the state of trigger mode to test transient lightsource.
Equip with CHP-500C power supply to realize starting time, run-up time, flicker of lamps function, it can record allof datas and curves which reach the standard of American Energy Star test requirement.
Characteristics
○ Measurement Function: Illuminance, Luminous Flux(equipped with integrating sphere), can record waveform
○ Sensor: Silicon device, prefix amplified
○ V(λ)Missmatch Error:f1'≤5%(one class)
○ Measuring Area: Φ12mm(Optional)
● Measuring Rang
○ Illuminance:0.1lx~200klx;
○ Luminous Flux:0.1lm~200klm
● Test accuracy
○ Illuminance:±4%(according to JJG245-2005)
○ Luminous Flux: the accuracy related to system
○ Sampling Speed: Fastest is 20kS/s(Optional)
○ Record Width: Need to cooperate with software, recordthe width can be set freely
○ Record Width: Need to cooperate with software, record the width can be set freely.
- Previous itemLTS-5000LED Optical Attenuator Test System
- Next itemIntegrating Sphere (0.1/0.3m )